Dealing with a High Water Table During In-ground Pool Construction

Ground Water Issues with In-ground Pool Installation Salisbury, MA

Ground water durring an in-ground pool installation in Salisbury, MA -click to enlarge

The first thing a pool builder must learn when building in-ground swimming pools is how to handle a high water table. A pool’s finished height in the yard should not be compromised by a high water table. The builder must gain control of the ground water during construction until the pool is finally filled. An under drain must be installed underneath the pool’s rough construction. This would consist of a 1 ½” pvc line buried in ¾” stone at least 18” below the final desired depth of the pool. A reputable builder will leave the homeowner a way to access an under drain for future use when draining the pool is required.

When we install an in ground swimming pool in an area that has a high water table we must get control of the water at a level 1’ below where we are working. To do this you must determine how much water you are dealing with and how deep into the water table you will be working. To completely control the ground water in a pool dig you must have ¾” stone banked as high as the water table. The object is not to stop the water it is to control where it goes. When the ground water runs into the hole it hits the stone and falls to the bottom of the excavation. At least 18” below the finished surface we install an under drain beneath the pool. This line will run underneath the entire pool to the surface of the yard where a self priming pool pump will be hooked up to the end and pump the water from beneath the pool. We will use between 15-30 yards of ¾’ crushed stone in a pool dig with a high water table. The material you are digging in will determine how much stone you will need. If the soil is tight like clay then you will not need as much stone to dewater the hole. The tighter the soil the less it will clog the stone as the ground water runs through it. If the soil is loose and sandy then much more stone will be needed to control the water. The looser the soil the more fines in the material will clog the stone. Therefore you will need more stone to keep control of the water.

In 21 years of installing pools I have never run across a site where we could not control the water. Now, having said that, not every area we have installed these pools was a great idea. One thing to consider when installing a pool in a high water table is to adjust the bottom of the pool not the height of the pool. You are installing an “in ground pool” not an above ground pool or an ant hill . Either bring the finished depth up out of the water table by making the pool 6’ deep instead of 8’ deep, or adjust the interior slopes with in the pool so they are more gradual and allowing you to bank the stone higher. You will have to abandon a diving board when opting for either of these two options.

Dealing with a high water table in an inground pool installation MA

Notice how the pump is still running under the stone during construction

Sometimes the hassle of being deep into the water table is not worth going for a diving pool. I know, I own one of these pools. While digging my own swimming pool we were digging in all sand and 4’ deep into the water table. If you have ever been to the beach and dug a hole down by the water you will know how hard it is to dig a deep hole in the sand with the water rushing in. In my case I could only get 7’ of depth before the water and cave- ins were unbearable. Not enough water depth for a diving board but plenty of depth for the 360 degree slide we have running into the deep end. It took my three children about as long as it took to climb the ladder on the slide to get over the fact we were not going to have a diving board. Don’t be afraid of the ground water just get control of it. Be practical about how deep you want to go into the ground water. Believe it or not we hit ground water on at least 40% of all the pools we build in our area of New England.

About Jay Broyer

Jay is the retail sales manager at Precision Pool Construction and has been running the store for the past 9 years. He has been in the pool and spa industry for the last 13 years and is CPO certified by the National Swimming Pool Foundation. In additionto his pool and spa experience, Jay is an accomplished solo singer/songwriter who has been featured on various Boston radio stations and has played in some of the areas best music venues. Connect with Jay on Google +

3 Comments
  1. I saw a pool on http://aamcopoolservice.com that looked like it had water behind it. WHat happens when this does happen and how do you fix it?

  2. Hi Nick,

    That is a great question as it is something that does happen every once in a while. There are two ways of water getting behind the liner. 1) ground water level rising and floating the liner or 2) the liner has pulled out of the tracking and over the winter or due to some other means water has gotten over the height of the pulled out liner and behind the wall.

    Both problems are dealt with similarly. We are forced to pull back a small section of the liner and use a pump with a small piece of pipe or hose that reaches all the way down to the water level. We do this as carefully as possibly and never put a full submersible pump behind the liner. We use a self priming pool pump with a reduced 1″ pipe going behind the liner and down to the water level.

    Hopefully when running into sever ground water that as caused the pool loner to float the builder thought ahead and installed a permanent under drain. In this case we can tap into that under drain pipe which is running from the deep end up to ground level with a self priming pool pump and lower the ground water that way.

  3. Ah! So that “extra” pipe over by my pump is probably an under drain? I already have a pool cleaner line identified.

Leave a Reply

*

Contact Info

Precision Pool Construction
83 Haverhill Rd. Amesbury, Massachusetts 01913
Phone: 978-388-2585
Summer Hours:
info@precisionpool.net
Massachusetts In-ground Pool Design, Construction, and Service. With a complete retail pool store in Amesbury.
Find us on Google+